Module java.base
Package java.util

Class Vector<E>

java.lang.Object
java.util.AbstractCollection<E>
java.util.AbstractList<E>
java.util.Vector<E>
Type Parameters:
E - Type of component elements
All Implemented Interfaces:
Serializable, Cloneable, Iterable<E>, Collection<E>, List<E>, RandomAccess, SequencedCollection<E>
Direct Known Subclasses:
Stack
public class Vector<E> extends AbstractList<E> implements List<E>, RandomAccess, Cloneable, Serializable
The Vector class implements a growable array of objects. Like an array, it contains components that can be accessed using an integer index. However, the size of a Vector can grow or shrink as needed to accommodate adding and removing items after the Vector has been created.

Each vector tries to optimize storage management by maintaining a capacity and a capacityIncrement. The capacity is always at least as large as the vector size; it is usually larger because as components are added to the vector, the vector's storage increases in chunks the size of capacityIncrement. An application can increase the capacity of a vector before inserting a large number of components; this reduces the amount of incremental reallocation.

The iterators returned by this class's iterator and listIterator methods are fail-fast: if the vector is structurally modified at any time after the iterator is created, in any way except through the iterator's own remove or add methods, the iterator will throw a ConcurrentModificationException. Thus, in the face of concurrent modification, the iterator fails quickly and cleanly, rather than risking arbitrary, non-deterministic behavior at an undetermined time in the future. The Enumerations returned by the elements method are not fail-fast; if the Vector is structurally modified at any time after the enumeration is created then the results of enumerating are undefined.

Note that the fail-fast behavior of an iterator cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast iterators throw ConcurrentModificationException on a best-effort basis. Therefore, it would be wrong to write a program that depended on this exception for its correctness: the fail-fast behavior of iterators should be used only to detect bugs.

As of the Java 2 platform v1.2, this class was retrofitted to implement the List interface, making it a member of the Java Collections Framework. Unlike the new collection implementations, Vector is synchronized. If a thread-safe implementation is not needed, it is recommended to use ArrayList in place of Vector.

Since:
1.0
See Also:

  • Field Summary

    Fields
    Modifier and Type
    Field
    Description
    protected int
    capacityIncrement
    The amount by which the capacity of the vector is automatically incremented when its size becomes greater than its capacity.
    protected int
    elementCount
    The number of valid components in this Vector object.
    protected Object[]
    elementData
    The array buffer into which the components of the vector are stored.

    Fields declared in class java.util.AbstractList

    modCount

  • Constructor Summary

    Constructors
    Constructor
    Description
    Vector()
    Constructs an empty vector so that its internal data array has size 10 and its standard capacity increment is zero.
    Vector(int initialCapacity)
    Constructs an empty vector with the specified initial capacity and with its capacity increment equal to zero.
    Vector(int initialCapacity, int capacityIncrement)
    Constructs an empty vector with the specified initial capacity and capacity increment.
    Vector(Collection<? extends E> c)
    Constructs a vector containing the elements of the specified collection, in the order they are returned by the collection's iterator.

  • Method Summary

    Modifier and Type
    Method
    Description
    void
    add(int index, E element)
    Inserts the specified element at the specified position in this Vector.
    boolean
    add(E e)
    Appends the specified element to the end of this Vector.
    boolean
    addAll(int index, Collection<? extends E> c)
    Inserts all of the elements in the specified Collection into this Vector at the specified position.
    boolean
    addAll(Collection<? extends E> c)
    Appends all of the elements in the specified Collection to the end of this Vector, in the order that they are returned by the specified Collection's Iterator.
    void
    addElement(E obj)
    Adds the specified component to the end of this vector, increasing its size by one.
    int
    capacity()
    Returns the current capacity of this vector.
    void
    clear()
    Removes all of the elements from this Vector.
    Object
    clone()
    Returns a clone of this vector.
    boolean
    contains(Object o)
    Returns true if this vector contains the specified element.
    boolean
    containsAll(Collection<?> c)
    Returns true if this Vector contains all of the elements in the specified Collection.
    void
    copyInto(Object[] anArray)
    Copies the components of this vector into the specified array.
    E
    elementAt(int index)
    Returns the component at the specified index.
    Enumeration<E>
    elements()
    Returns an enumeration of the components of this vector.
    void
    ensureCapacity(int minCapacity)
    Increases the capacity of this vector, if necessary, to ensure that it can hold at least the number of components specified by the minimum capacity argument.
    boolean
    equals(Object o)
    Compares the specified Object with this Vector for equality.
    E
    firstElement()
    Returns the first component (the item at index 0) of this vector.
    void
    forEach(Consumer<? super E> action)
    Performs the given action for each element of the Iterable until all elements have been processed or the action throws an exception.
    E
    get(int index)
    Returns the element at the specified position in this Vector.
    int
    hashCode()
    Returns the hash code value for this Vector.
    int
    indexOf(Object o)
    Returns the index of the first occurrence of the specified element in this vector, or -1 if this vector does not contain the element.
    int
    indexOf(Object o, int index)
    Returns the index of the first occurrence of the specified element in this vector, searching forwards from index, or returns -1 if the element is not found.
    void
    insertElementAt(E obj, int index)
    Inserts the specified object as a component in this vector at the specified index.
    boolean
    isEmpty()
    Tests if this vector has no components.
    Iterator<E>
    iterator()
    Returns an iterator over the elements in this list in proper sequence.
    E
    lastElement()
    Returns the last component of the vector.
    int
    lastIndexOf(Object o)
    Returns the index of the last occurrence of the specified element in this vector, or -1 if this vector does not contain the element.
    int
    lastIndexOf(Object o, int index)
    Returns the index of the last occurrence of the specified element in this vector, searching backwards from index, or returns -1 if the element is not found.
    ListIterator<E>
    listIterator()
    Returns a list iterator over the elements in this list (in proper sequence).
    ListIterator<E>
    listIterator(int index)
    Returns a list iterator over the elements in this list (in proper sequence), starting at the specified position in the list.
    E
    remove(int index)
    Removes the element at the specified position in this Vector.
    boolean
    remove(Object o)
    Removes the first occurrence of the specified element in this Vector If the Vector does not contain the element, it is unchanged.
    boolean
    removeAll(Collection<?> c)
    Removes from this Vector all of its elements that are contained in the specified Collection.
    void
    removeAllElements()
    Removes all components from this vector and sets its size to zero.
    boolean
    removeElement(Object obj)
    Removes the first (lowest-indexed) occurrence of the argument from this vector.
    void
    removeElementAt(int index)
    Deletes the component at the specified index.
    boolean
    removeIf(Predicate<? super E> filter)
    Removes all of the elements of this collection that satisfy the given predicate.
    protected void
    removeRange(int fromIndex, int toIndex)
    Removes from this list all of the elements whose index is between fromIndex, inclusive, and toIndex, exclusive.
    void
    replaceAll(UnaryOperator<E> operator)
    Replaces each element of this list with the result of applying the operator to that element.
    boolean
    retainAll(Collection<?> c)
    Retains only the elements in this Vector that are contained in the specified Collection.
    E
    set(int index, E element)
    Replaces the element at the specified position in this Vector with the specified element.
    void
    setElementAt(E obj, int index)
    Sets the component at the specified index of this vector to be the specified object.
    void
    setSize(int newSize)
    Sets the size of this vector.
    int
    size()
    Returns the number of components in this vector.
    Spliterator<E>
    spliterator()
    Creates a late-binding and fail-fast Spliterator over the elements in this list.
    List<E>
    subList(int fromIndex, int toIndex)
    Returns a view of the portion of this List between fromIndex, inclusive, and toIndex, exclusive.
    Object[]
    toArray()
    Returns an array containing all of the elements in this Vector in the correct order.
    <T> T[]
    toArray(T[] a)
    Returns an array containing all of the elements in this Vector in the correct order; the runtime type of the returned array is that of the specified array.
    String
    toString()
    Returns a string representation of this Vector, containing the String representation of each element.
    void
    trimToSize()
    Trims the capacity of this vector to be the vector's current size.

    Methods declared in class java.lang.Object

    finalize, getClass, notify, notifyAll, wait, wait, wait

    Methods declared in interface java.util.Collection

    parallelStream, stream, toArray

    Methods declared in interface java.util.List

    addFirst, addLast, getFirst, getLast, removeFirst, removeLast, reversed, sort

  • Field Details

    • elementData

      protected Object[] elementData
      The array buffer into which the components of the vector are stored. The capacity of the vector is the length of this array buffer, and is at least large enough to contain all the vector's elements.

      Any array elements following the last element in the Vector are null.

    • elementCount

      protected int elementCount
      The number of valid components in this Vector object. Components elementData[0] through elementData[elementCount-1] are the actual items.

    • capacityIncrement

      protected int capacityIncrement
      The amount by which the capacity of the vector is automatically incremented when its size becomes greater than its capacity. If the capacity increment is less than or equal to zero, the capacity of the vector is doubled each time it needs to grow.

  • Constructor Details

    • Vector

      public Vector(int initialCapacity, int capacityIncrement)
      Constructs an empty vector with the specified initial capacity and capacity increment.
      Parameters:
      initialCapacity - the initial capacity of the vector
      capacityIncrement - the amount by which the capacity is increased when the vector overflows
      Throws:
      IllegalArgumentException - if the specified initial capacity is negative

    • Vector

      public Vector(int initialCapacity)
      Constructs an empty vector with the specified initial capacity and with its capacity increment equal to zero.
      Parameters:
      initialCapacity - the initial capacity of the vector
      Throws:
      IllegalArgumentException - if the specified initial capacity is negative

    • Vector

      public Vector()
      Constructs an empty vector so that its internal data array has size 10 and its standard capacity increment is zero.

    • Vector

      public Vector(Collection<? extends E> c)
      Constructs a vector containing the elements of the specified collection, in the order they are returned by the collection's iterator.
      Parameters:
      c - the collection whose elements are to be placed into this vector
      Throws:
      NullPointerException - if the specified collection is null
      Since:
      1.2

  • Method Details

    • copyInto

      public void copyInto(Object[] anArray)
      Copies the components of this vector into the specified array. The item at index k in this vector is copied into component k of anArray.
      Parameters:
      anArray - the array into which the components get copied
      Throws:
      NullPointerException - if the given array is null
      IndexOutOfBoundsException - if the specified array is not large enough to hold all the components of this vector
      ArrayStoreException - if a component of this vector is not of a runtime type that can be stored in the specified array
      See Also:

    • trimToSize

      public void trimToSize()
      Trims the capacity of this vector to be the vector's current size. If the capacity of this vector is larger than its current size, then the capacity is changed to equal the size by replacing its internal data array, kept in the field elementData, with a smaller one. An application can use this operation to minimize the storage of a vector.

    • ensureCapacity

      public void ensureCapacity(int minCapacity)
      Increases the capacity of this vector, if necessary, to ensure that it can hold at least the number of components specified by the minimum capacity argument.

      If the current capacity of this vector is less than minCapacity, then its capacity is increased by replacing its internal data array, kept in the field elementData, with a larger one. The size of the new data array will be the old size plus capacityIncrement, unless the value of capacityIncrement is less than or equal to zero, in which case the new capacity will be twice the old capacity; but if this new size is still smaller than minCapacity, then the new capacity will be minCapacity.

      Parameters:
      minCapacity - the desired minimum capacity

    • setSize

      public void setSize(int newSize)
      Sets the size of this vector. If the new size is greater than the current size, new null items are added to the end of the vector. If the new size is less than the current size, all components at index newSize and greater are discarded.
      Parameters:
      newSize - the new size of this vector
      Throws:
      ArrayIndexOutOfBoundsException - if the new size is negative

    • capacity

      public int capacity()
      Returns the current capacity of this vector.
      Returns:
      the current capacity (the length of its internal data array, kept in the field elementData of this vector)

    • size

      public int size()
      Returns the number of components in this vector.
      Specified by:
      size in interface Collection<E>
      Specified by:
      size in interface List<E>
      Returns:
      the number of components in this vector

    • isEmpty

      public boolean isEmpty()
      Tests if this vector has no components.
      Specified by:
      isEmpty in interface Collection<E>
      Specified by:
      isEmpty in interface List<E>
      Overrides:
      isEmpty in class AbstractCollection<E>
      Returns:
      true if and only if this vector has no components, that is, its size is zero; false otherwise.

    • elements

      public Enumeration<E> elements()
      Returns an enumeration of the components of this vector. The returned Enumeration object will generate all items in this vector. The first item generated is the item at index 0, then the item at index 1, and so on. If the vector is structurally modified while enumerating over the elements then the results of enumerating are undefined.
      Returns:
      an enumeration of the components of this vector
      See Also:

    • contains

      public boolean contains(Object o)
      Returns true if this vector contains the specified element. More formally, returns true if and only if this vector contains at least one element e such that Objects.equals(o, e).
      Specified by:
      contains in interface Collection<E>
      Specified by:
      contains in interface List<E>
      Overrides:
      contains in class AbstractCollection<E>
      Parameters:
      o - element whose presence in this vector is to be tested
      Returns:
      true if this vector contains the specified element

    • indexOf

      public int indexOf(Object o)
      Returns the index of the first occurrence of the specified element in this vector, or -1 if this vector does not contain the element. More formally, returns the lowest index i such that Objects.equals(o, get(i)), or -1 if there is no such index.
      Specified by:
      indexOf in interface List<E>
      Overrides:
      indexOf in class AbstractList<E>
      Parameters:
      o - element to search for
      Returns:
      the index of the first occurrence of the specified element in this vector, or -1 if this vector does not contain the element

    • indexOf

      public int indexOf(Object o, int index)
      Returns the index of the first occurrence of the specified element in this vector, searching forwards from index, or returns -1 if the element is not found. More formally, returns the lowest index i such that (i >= index && Objects.equals(o, get(i))), or -1 if there is no such index.
      Parameters:
      o - element to search for
      index - index to start searching from
      Returns:
      the index of the first occurrence of the element in this vector at position index or later in the vector; -1 if the element is not found.
      Throws:
      IndexOutOfBoundsException - if the specified index is negative
      See Also:

    • lastIndexOf

      public int lastIndexOf(Object o)
      Returns the index of the last occurrence of the specified element in this vector, or -1 if this vector does not contain the element. More formally, returns the highest index i such that Objects.equals(o, get(i)), or -1 if there is no such index.
      Specified by:
      lastIndexOf in interface List<E>
      Overrides:
      lastIndexOf in class AbstractList<E>
      Parameters:
      o - element to search for
      Returns:
      the index of the last occurrence of the specified element in this vector, or -1 if this vector does not contain the element

    • lastIndexOf

      public int lastIndexOf(Object o, int index)
      Returns the index of the last occurrence of the specified element in this vector, searching backwards from index, or returns -1 if the element is not found. More formally, returns the highest index i such that (i <= index && Objects.equals(o, get(i))), or -1 if there is no such index.
      Parameters:
      o - element to search for
      index - index to start searching backwards from
      Returns:
      the index of the last occurrence of the element at position less than or equal to index in this vector; -1 if the element is not found.
      Throws:
      IndexOutOfBoundsException - if the specified index is greater than or equal to the current size of this vector

    • elementAt

      public E elementAt(int index)
      Returns the component at the specified index.

      This method is identical in functionality to the get(int) method (which is part of the List interface).

      Parameters:
      index - an index into this vector
      Returns:
      the component at the specified index
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index >= size())

    • firstElement

      public E firstElement()
      Returns the first component (the item at index 0) of this vector.
      Returns:
      the first component of this vector
      Throws:
      NoSuchElementException - if this vector has no components

    • lastElement

      public E lastElement()
      Returns the last component of the vector.
      Returns:
      the last component of the vector, i.e., the component at index size() - 1
      Throws:
      NoSuchElementException - if this vector is empty

    • setElementAt

      public void setElementAt(E obj, int index)
      Sets the component at the specified index of this vector to be the specified object. The previous component at that position is discarded.

      The index must be a value greater than or equal to 0 and less than the current size of the vector.

      This method is identical in functionality to the set(int, E) method (which is part of the List interface). Note that the set method reverses the order of the parameters, to more closely match array usage. Note also that the set method returns the old value that was stored at the specified position.

      Parameters:
      obj - what the component is to be set to
      index - the specified index
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index >= size())

    • removeElementAt

      public void removeElementAt(int index)
      Deletes the component at the specified index. Each component in this vector with an index greater or equal to the specified index is shifted downward to have an index one smaller than the value it had previously. The size of this vector is decreased by 1.

      The index must be a value greater than or equal to 0 and less than the current size of the vector.

      This method is identical in functionality to the remove(int) method (which is part of the List interface). Note that the remove method returns the old value that was stored at the specified position.

      Parameters:
      index - the index of the object to remove
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index >= size())

    • insertElementAt

      public void insertElementAt(E obj, int index)
      Inserts the specified object as a component in this vector at the specified index. Each component in this vector with an index greater or equal to the specified index is shifted upward to have an index one greater than the value it had previously.

      The index must be a value greater than or equal to 0 and less than or equal to the current size of the vector. (If the index is equal to the current size of the vector, the new element is appended to the Vector.)

      This method is identical in functionality to the add(int, E) method (which is part of the List interface). Note that the add method reverses the order of the parameters, to more closely match array usage.

      Parameters:
      obj - the component to insert
      index - where to insert the new component
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index > size())

    • addElement

      public void addElement(E obj)
      Adds the specified component to the end of this vector, increasing its size by one. The capacity of this vector is increased if its size becomes greater than its capacity.

      This method is identical in functionality to the add(E) method (which is part of the List interface).

      Parameters:
      obj - the component to be added

    • removeElement

      public boolean removeElement(Object obj)
      Removes the first (lowest-indexed) occurrence of the argument from this vector. If the object is found in this vector, each component in the vector with an index greater or equal to the object's index is shifted downward to have an index one smaller than the value it had previously.

      This method is identical in functionality to the remove(Object) method (which is part of the List interface).

      Parameters:
      obj - the component to be removed
      Returns:
      true if the argument was a component of this vector; false otherwise.

    • removeAllElements

      public void removeAllElements()
      Removes all components from this vector and sets its size to zero.

      This method is identical in functionality to the clear() method (which is part of the List interface).

    • clone

      public Object clone()
      Returns a clone of this vector. The copy will contain a reference to a clone of the internal data array, not a reference to the original internal data array of this Vector object.
      Overrides:
      clone in class Object
      Returns:
      a clone of this vector
      See Also:

    • toArray

      public Object[] toArray()
      Returns an array containing all of the elements in this Vector in the correct order.
      Specified by:
      toArray in interface Collection<E>
      Specified by:
      toArray in interface List<E>
      Overrides:
      toArray in class AbstractCollection<E>
      Returns:
      an array, whose runtime component type is Object, containing all of the elements in this collection
      Since:
      1.2
      See Also:

    • toArray

      public <T> T[] toArray(T[] a)
      Returns an array containing all of the elements in this Vector in the correct order; the runtime type of the returned array is that of the specified array. If the Vector fits in the specified array, it is returned therein. Otherwise, a new array is allocated with the runtime type of the specified array and the size of this Vector.

      If the Vector fits in the specified array with room to spare (i.e., the array has more elements than the Vector), the element in the array immediately following the end of the Vector is set to null. (This is useful in determining the length of the Vector only if the caller knows that the Vector does not contain any null elements.)

      Specified by:
      toArray in interface Collection<E>
      Specified by:
      toArray in interface List<E>
      Overrides:
      toArray in class AbstractCollection<E>
      Type Parameters:
      T - type of array elements. The same type as <E> or a supertype of <E>.
      Parameters:
      a - the array into which the elements of the Vector are to be stored, if it is big enough; otherwise, a new array of the same runtime type is allocated for this purpose.
      Returns:
      an array containing the elements of the Vector
      Throws:
      ArrayStoreException - if the runtime type of a, <T>, is not a supertype of the runtime type, <E>, of every element in this Vector
      NullPointerException - if the given array is null
      Since:
      1.2

    • get

      public E get(int index)
      Returns the element at the specified position in this Vector.
      Specified by:
      get in interface List<E>
      Specified by:
      get in class AbstractList<E>
      Parameters:
      index - index of the element to return
      Returns:
      object at the specified index
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index >= size())
      Since:
      1.2

    • set

      public E set(int index, E element)
      Replaces the element at the specified position in this Vector with the specified element.
      Specified by:
      set in interface List<E>
      Overrides:
      set in class AbstractList<E>
      Parameters:
      index - index of the element to replace
      element - element to be stored at the specified position
      Returns:
      the element previously at the specified position
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index >= size())
      Since:
      1.2

    • add

      public boolean add(E e)
      Appends the specified element to the end of this Vector.
      Specified by:
      add in interface Collection<E>
      Specified by:
      add in interface List<E>
      Overrides:
      add in class AbstractList<E>
      Parameters:
      e - element to be appended to this Vector
      Returns:
      true (as specified by Collection.add(E))
      Since:
      1.2

    • remove

      public boolean remove(Object o)
      Removes the first occurrence of the specified element in this Vector If the Vector does not contain the element, it is unchanged. More formally, removes the element with the lowest index i such that Objects.equals(o, get(i)) (if such an element exists).
      Specified by:
      remove in interface Collection<E>
      Specified by:
      remove in interface List<E>
      Overrides:
      remove in class AbstractCollection<E>
      Parameters:
      o - element to be removed from this Vector, if present
      Returns:
      true if the Vector contained the specified element
      Since:
      1.2

    • add

      public void add(int index, E element)
      Inserts the specified element at the specified position in this Vector. Shifts the element currently at that position (if any) and any subsequent elements to the right (adds one to their indices).
      Specified by:
      add in interface List<E>
      Overrides:
      add in class AbstractList<E>
      Parameters:
      index - index at which the specified element is to be inserted
      element - element to be inserted
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index > size())
      Since:
      1.2

    • remove

      public E remove(int index)
      Removes the element at the specified position in this Vector. Shifts any subsequent elements to the left (subtracts one from their indices). Returns the element that was removed from the Vector.
      Specified by:
      remove in interface List<E>
      Overrides:
      remove in class AbstractList<E>
      Parameters:
      index - the index of the element to be removed
      Returns:
      element that was removed
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index >= size())
      Since:
      1.2

    • clear

      public void clear()
      Removes all of the elements from this Vector. The Vector will be empty after this call returns (unless it throws an exception).
      Specified by:
      clear in interface Collection<E>
      Specified by:
      clear in interface List<E>
      Overrides:
      clear in class AbstractList<E>
      Since:
      1.2

    • containsAll

      public boolean containsAll(Collection<?> c)
      Returns true if this Vector contains all of the elements in the specified Collection.
      Specified by:
      containsAll in interface Collection<E>
      Specified by:
      containsAll in interface List<E>
      Overrides:
      containsAll in class AbstractCollection<E>
      Parameters:
      c - a collection whose elements will be tested for containment in this Vector
      Returns:
      true if this Vector contains all of the elements in the specified collection
      Throws:
      NullPointerException - if the specified collection is null
      See Also:

    • addAll

      public boolean addAll(Collection<? extends E> c)
      Appends all of the elements in the specified Collection to the end of this Vector, in the order that they are returned by the specified Collection's Iterator. The behavior of this operation is undefined if the specified Collection is modified while the operation is in progress. (This implies that the behavior of this call is undefined if the specified Collection is this Vector, and this Vector is nonempty.)
      Specified by:
      addAll in interface Collection<E>
      Specified by:
      addAll in interface List<E>
      Overrides:
      addAll in class AbstractCollection<E>
      Parameters:
      c - elements to be inserted into this Vector
      Returns:
      true if this Vector changed as a result of the call
      Throws:
      NullPointerException - if the specified collection is null
      Since:
      1.2
      See Also:

    • removeAll

      public boolean removeAll(Collection<?> c)
      Removes from this Vector all of its elements that are contained in the specified Collection.
      Specified by:
      removeAll in interface Collection<E>
      Specified by:
      removeAll in interface List<E>
      Overrides:
      removeAll in class AbstractCollection<E>
      Parameters:
      c - a collection of elements to be removed from the Vector
      Returns:
      true if this Vector changed as a result of the call
      Throws:
      ClassCastException - if the types of one or more elements in this vector are incompatible with the specified collection (optional)
      NullPointerException - if this vector contains one or more null elements and the specified collection does not support null elements (optional), or if the specified collection is null
      Since:
      1.2
      See Also:

    • retainAll

      public boolean retainAll(Collection<?> c)
      Retains only the elements in this Vector that are contained in the specified Collection. In other words, removes from this Vector all of its elements that are not contained in the specified Collection.
      Specified by:
      retainAll in interface Collection<E>
      Specified by:
      retainAll in interface List<E>
      Overrides:
      retainAll in class AbstractCollection<E>
      Parameters:
      c - a collection of elements to be retained in this Vector (all other elements are removed)
      Returns:
      true if this Vector changed as a result of the call
      Throws:
      ClassCastException - if the types of one or more elements in this vector are incompatible with the specified collection (optional)
      NullPointerException - if this vector contains one or more null elements and the specified collection does not support null elements (optional), or if the specified collection is null
      Since:
      1.2
      See Also:

    • removeIf

      public boolean removeIf(Predicate<? super E> filter)
      Description copied from interface: Collection
      Removes all of the elements of this collection that satisfy the given predicate. Errors or runtime exceptions thrown during iteration or by the predicate are relayed to the caller.
      Specified by:
      removeIf in interface Collection<E>
      Parameters:
      filter - a predicate which returns true for elements to be removed
      Returns:
      true if any elements were removed
      Throws:
      NullPointerException - if the specified filter is null

    • addAll

      public boolean addAll(int index, Collection<? extends E> c)
      Inserts all of the elements in the specified Collection into this Vector at the specified position. Shifts the element currently at that position (if any) and any subsequent elements to the right (increases their indices). The new elements will appear in the Vector in the order that they are returned by the specified Collection's iterator.
      Specified by:
      addAll in interface List<E>
      Overrides:
      addAll in class AbstractList<E>
      Parameters:
      index - index at which to insert the first element from the specified collection
      c - elements to be inserted into this Vector
      Returns:
      true if this Vector changed as a result of the call
      Throws:
      ArrayIndexOutOfBoundsException - if the index is out of range (index < 0 || index > size())
      NullPointerException - if the specified collection is null
      Since:
      1.2

    • equals

      public boolean equals(Object o)
      Compares the specified Object with this Vector for equality. Returns true if and only if the specified Object is also a List, both Lists have the same size, and all corresponding pairs of elements in the two Lists are equal. (Two elements e1 and e2 are equal if Objects.equals(e1, e2).) In other words, two Lists are defined to be equal if they contain the same elements in the same order.
      Specified by:
      equals in interface Collection<E>
      Specified by:
      equals in interface List<E>
      Overrides:
      equals in class AbstractList<E>
      Parameters:
      o - the Object to be compared for equality with this Vector
      Returns:
      true if the specified Object is equal to this Vector
      See Also:

    • hashCode

      public int hashCode()
      Returns the hash code value for this Vector.
      Specified by:
      hashCode in interface Collection<E>
      Specified by:
      hashCode in interface List<E>
      Overrides:
      hashCode in class AbstractList<E>
      Returns:
      the hash code value for this list
      See Also:

    • toString

      public String toString()
      Returns a string representation of this Vector, containing the String representation of each element.
      Overrides:
      toString in class AbstractCollection<E>
      Returns:
      a string representation of this collection

    • subList

      public List<E> subList(int fromIndex, int toIndex)
      Returns a view of the portion of this List between fromIndex, inclusive, and toIndex, exclusive. (If fromIndex and toIndex are equal, the returned List is empty.) The returned List is backed by this List, so changes in the returned List are reflected in this List, and vice-versa. The returned List supports all of the optional List operations supported by this List.

      This method eliminates the need for explicit range operations (of the sort that commonly exist for arrays). Any operation that expects a List can be used as a range operation by operating on a subList view instead of a whole List. For example, the following idiom removes a range of elements from a List: 

            list.subList(from, to).clear();
      Similar idioms may be constructed for indexOf and lastIndexOf, and all of the algorithms in the Collections class can be applied to a subList.

      The semantics of the List returned by this method become undefined if the backing list (i.e., this List) is structurally modified in any way other than via the returned List. (Structural modifications are those that change the size of the List, or otherwise perturb it in such a fashion that iterations in progress may yield incorrect results.)

      Specified by:
      subList in interface List<E>
      Overrides:
      subList in class AbstractList<E>
      Parameters:
      fromIndex - low endpoint (inclusive) of the subList
      toIndex - high endpoint (exclusive) of the subList
      Returns:
      a view of the specified range within this List
      Throws:
      IndexOutOfBoundsException - if an endpoint index value is out of range (fromIndex < 0 || toIndex > size)
      IllegalArgumentException - if the endpoint indices are out of order (fromIndex > toIndex)

    • removeRange

      protected void removeRange(int fromIndex, int toIndex)
      Removes from this list all of the elements whose index is between fromIndex, inclusive, and toIndex, exclusive. Shifts any succeeding elements to the left (reduces their index). This call shortens the list by (toIndex - fromIndex) elements. (If toIndex==fromIndex, this operation has no effect.)
      Overrides:
      removeRange in class AbstractList<E>
      Parameters:
      fromIndex - index of first element to be removed
      toIndex - index after last element to be removed

    • listIterator

      public ListIterator<E> listIterator(int index)
      Returns a list iterator over the elements in this list (in proper sequence), starting at the specified position in the list. The specified index indicates the first element that would be returned by an initial call to next. An initial call to previous would return the element with the specified index minus one.

      The returned list iterator is fail-fast.

      Specified by:
      listIterator in interface List<E>
      Overrides:
      listIterator in class AbstractList<E>
      Parameters:
      index - index of the first element to be returned from the list iterator (by a call to next)
      Returns:
      a list iterator over the elements in this list (in proper sequence), starting at the specified position in the list
      Throws:
      IndexOutOfBoundsException - if the index is out of range (index < 0 || index > size())

    • listIterator

      public ListIterator<E> listIterator()
      Returns a list iterator over the elements in this list (in proper sequence).

      The returned list iterator is fail-fast.

      Specified by:
      listIterator in interface List<E>
      Overrides:
      listIterator in class AbstractList<E>
      Returns:
      a list iterator over the elements in this list (in proper sequence)
      See Also:

    • iterator

      public Iterator<E> iterator()
      Returns an iterator over the elements in this list in proper sequence.

      The returned iterator is fail-fast.

      Specified by:
      iterator in interface Collection<E>
      Specified by:
      iterator in interface Iterable<E>
      Specified by:
      iterator in interface List<E>
      Overrides:
      iterator in class AbstractList<E>
      Returns:
      an iterator over the elements in this list in proper sequence

    • forEach

      public void forEach(Consumer<? super E> action)
      Description copied from interface: Iterable
      Performs the given action for each element of the Iterable until all elements have been processed or the action throws an exception. Actions are performed in the order of iteration, if that order is specified. Exceptions thrown by the action are relayed to the caller.

      The behavior of this method is unspecified if the action performs side-effects that modify the underlying source of elements, unless an overriding class has specified a concurrent modification policy.

      Specified by:
      forEach in interface Iterable<E>
      Parameters:
      action - The action to be performed for each element
      Throws:
      NullPointerException - if the specified action is null

    • replaceAll

      public void replaceAll(UnaryOperator<E> operator)
      Description copied from interface: List
      Replaces each element of this list with the result of applying the operator to that element. Errors or runtime exceptions thrown by the operator are relayed to the caller.
      Specified by:
      replaceAll in interface List<E>
      Parameters:
      operator - the operator to apply to each element
      Throws:
      NullPointerException - if the specified operator is null or if the operator result is a null value and this list does not permit null elements (optional)

    • spliterator

      public Spliterator<E> spliterator()
      Creates a late-binding and fail-fast Spliterator over the elements in this list.

      The Spliterator reports Spliterator.SIZED, Spliterator.SUBSIZED, and Spliterator.ORDERED. Overriding implementations should document the reporting of additional characteristic values.

      Specified by:
      spliterator in interface Collection<E>
      Specified by:
      spliterator in interface Iterable<E>
      Specified by:
      spliterator in interface List<E>
      Returns:
      a Spliterator over the elements in this list
      Since:
      1.8